The steps of using AK500+
with SKC to make old Mercedes Benz key and new Mercedes Benz key is not the same.
The steps to
make old Mercedes Benz key with AK500+ Pro with SKC:
1. Remove the NEC chip from the old key
2. Put the removed NEC chip on the NEC adapter of the AK500+ pro
3. Ensure the chip direction is correct, and clean up the tin on the chip angle
4. Open the software and choose “Renew”
5. Write into the NEC chip with the key data generated by SKC Calculator, the key is that your car will use.
1. Remove the NEC chip from the old key
2. Put the removed NEC chip on the NEC adapter of the AK500+ pro
3. Ensure the chip direction is correct, and clean up the tin on the chip angle
4. Open the software and choose “Renew”
5. Write into the NEC chip with the key data generated by SKC Calculator, the key is that your car will use.
The steps to
make new Mercedes Benz key with AK500+
with SKC:
-Remove EIS
-Desolder CPU 1 from EIS
-Read data from EIS – CPU 1
-Save
-Close AK500+
-Open SKC Calculator
-Download the bin file
-Select keys for calculating result
-Calculate keys (About 7-10 minutes)
-Close SKC Calculator
-Open AK500+ again
-Click Step 4 to write the key option via IR
-Insert the key
-Load key dump file
-Click on programming
-Remove EIS
-Desolder CPU 1 from EIS
-Read data from EIS – CPU 1
-Save
-Close AK500+
-Open SKC Calculator
-Download the bin file
-Select keys for calculating result
-Calculate keys (About 7-10 minutes)
-Close SKC Calculator
-Open AK500+ again
-Click Step 4 to write the key option via IR
-Insert the key
-Load key dump file
-Click on programming
没有评论:
发表评论