AK500+ FAQ

How to do AK500+ KEY(old key and skc)?
Steps:
1.Dismantle the nec chip in the old key
2.There is a nec key chip adapter in our device, put it on the nec chip.
3.The direction of the key chip must be right and the chip should be clean.
4.Open the software and click?renew
5.Write the key data which is calculated by skc into nec chip,now here is the key that his car can use.

 Q: What AK500+ accessories less than AK500
A:1pc x 4E28B Block Adapter
1pc x EEPROM Adapter Folder
1pc x AK500 Connector Cable

Q: If I have bought AK500 and I need these three accessories, how to do
A: You can purchase them separately.

How to do Benz key by AK500?
Dismantle three car ECU(EIS,ESM/ESL,ECU) and then you can match key. In addition, AK500 needs 8pin folder to read and write ESM data.

AK500 and SKC: only need to read EIS data, and then give EIS data to SKC to calculate, at last it can complete key match. In addition, AK500 needs to operate one computer and it doesn’t need folder.
SKC makes the job easier for making Benz key. The key point of AK500 is that it can save time of dismantling two other computers but it can not do some vehicles. With SKC, you can do them.
AK500 and SKC can do key programmer and key match.

AK500:Read and write NEC KEY via infrared-ONLY for old keys, not for new keys; fast erase NEC chip via socket:the nec chip should be could renew.