JLR Mangoose SDD V142 download and setup instruction

Mangoose SDD V142 Verified Working:

On 07-07-2015, LAUNCH X431 is verified working well on Chinese JLR Mangoose cable and a video demo is made which show how to install SDD V142 driver.

SDD V142 DVD and software download:

LAUNCH X431

You will see these exe files

Download only these files:

SDD 142.00_FULL.exe

VDF_JA_142.exe

VDF_JV_142.exe

VDF_LA_142.exe

VDF_LV_142.exe

SDD_142.01.exe

SDD_142.02.exe

SPA_142.exe

With these files you can’t install yet, want to run with our JLR Mangoose cable, you need additional LAUNCH X431 

JLR Mangoose Pro SDD V142 Setup Instruction:

If you buy Mangoose Pro cable and software from LAUNCH X431 SDD V142 comes with 3 DVD’s, the CD’s is 99% Executables (.EXE) and a Frozen software to get license key.

OS requirement:

Xp system or XP Mode in Windows 7 (Step-by-step instruction:

LAUNCH X431 Disable antivirus software:

Disable both local area connection and wireless connection network, otherwise antivirus software will say virus possibility on the license key software.

Step – by –Step Installation

Reset Landrover service interval with JLR Mangoose SDD

Here is the step-by-step instruction on how to reset service interval for Land Rover Freelander L359 2010 with LAUNCH X431 SDD (current V142) diagnostic scan tool.

NOTE: The procedure is applied to all 2005 up SDD available Land Rover and Jaguar models.

Service interval reset:

Well install V142 or older SDD software followed the video instruction below:

Mangoose SDD V142 on VMware

LAUNCH X431

JLR SDD V139 on Win XP

LAUNCH X431

Run LAUNCH X431 software on the desktop

Launch SDD (Symptom Driven Diagnostic) software

Setup NCS-Expert on BMW INPA / Ediabas OBD & ADS Interface

In order to perform a diagnosis we will need the ADS interface for connecting INPA cable + INPA software. The interface, which I have here: LAUNCH X431

I assume from taking off in a situation when fully operate LAUNCH X431software or detects the battery (battery) and ignition.  After a successfully loaded INPA it is time for you desire to change and will be here for the needed tool, which is called the NCS Expert and is located in the Start Menu in the same folder in which the INPA. Thus, they works.

Disclaimer:

The text was translated form a Polish BMW forum, and you are on your own risk.

1. Launch the NCS Expert (we assume that INPA package we have installed in the language is not German).

2. Choose File -> Load Profile
3. Choose window profiles, select Expert Mode and click OK.
4.  Select File -> Edit Profile 
5. In the window Password Entry give the password to profile: repxet and click OK.
6. In the Profile Editor window, click the button Individualisierung (bottom left)
7. In Memory Car window select the option Individualisierung aktiv in the Car / Key Memory, and click OK
8.  Click the Profile button info (bottom right) in the window editor Profile
9. In the info window profiles in the Profile Name field with individualisation we add to our profile name sounded Expert Mode with individualisation (this way we will be able to easily distinguish it for the future of the original profile Expert Mode) and click OK
10. In the Profiles window, click consistence Editor check – should appear Info window that says consistence check OK
11.  In the Profile Editor window, click OK
12. Choose File -> Save Profile As and File Name box, change the profile number to another or FZG3.PFL and click OK
13. Choose File -> Load Profile Choose and window profiles have now Expert Mode profile with individualisation who select and click ok
14. Connect the LAUNCH X431 with the laptop. Strapped cables, we put our key into the ignition and turn on the ignition (not fire up the engine)
15. Choose the VIN / ZCS / FA (F1)
16. Select ZCS / FA f. ECU (read data ZCS / FA ECU our car)
17.  Choose CHASIS window select E39 (in my case).
18.  Choose the ECU box, select EWS and click ok … after a while, filling up the fields FG GM SA and VN
19. Select the options Back F6
20. Select Car Memory (F5)
21. We will get the following message:
22. In this window mode of operation determines whether the programmed key or car (Car Memory / Key Memory 1-4). My Bmka no key programming so I didn’t use of this, and therefore that portion Skip to something not mix. For me it was only Car Memory. There is a list of functions which we can reprogram. These functions are displayed in German.

How to use Mercedes Benz MB-PRO IR Code Reader

Top 2 features:

1) It can renew MB key through IR. Don’t need to remove the chips.

2)　Original chips can only be renewed on LAUNCH X431 PCB. NEC chips can be renewed many times.

MB-PRO IR Code Reader Functions:

1. This device can read or write eeprom through IR or PCB.
2. Renew original Mercedes NEC chips through PCB.
3. Through IR, it can read and write original Mercedes keys and MB-keys.
4. It can program 1997~2014 Mercedes Keyless entry remote fobs.
5. MB-keys can be read, write and renew through IR. You don’t have to remove the chips from circuit boards.
6. It can program keyless go remote fobs and NEC eis in the near future.

How to use the Mercedes-Benz LAUNCH X431 MB-PRO IR Code Reader?

Easy 5 steps:

Connect the LAUNCH X431 with computer via USB cable

1. Start the Software

1) Read or write through IR

2) Read or write through PCB

Star diagnosis XENTRY Connect C5 diagnose new W222 W205

Mercedes Benz original second-hand LAUNCH X431 diagnostic tool is available in uobd2.net. The DoIP SD Connect 100% supports 2014 and 2015 new Mercedes Benz W222, W205 etc models.

What’s DoIP?

SDconnect DoIP devices LAUNCH X431 for diagnosis of the model 222 S-Class have “SDconnect DoIP” on the model plate of the device (system number 170000 or higher). SDconnect DoIP includes an Ethernet switch, which switches the TCP/IP messages in the event of DoIP diagnosis to the vehicle side.

Main Sticker:

What MB model does DoIP SD connect support?

DoIP-compatible on-board diagnosis cables have yellow marking tape at both ends and this is the only cable that works with the SDconnect system number 170000 or higher. If the number is illegible on the system number sticker, please look at the main factory sticker above for the wording, “DoIP.”

XENTRY Kit

Since the end of November 2012, the new generation of the XENTRY Kit diagnostic hardware will be launched for all brands and categories of Daimler AG under the established XENTRY brand.

The new product concept and brand combination for hardware and software components will be the next step towards an integrated LAUNCH X431 After-Sales System environment with future-oriented diagnostic solutions.

Under the „XENTRY Solutions“ umbrella brand, users will now have access to XENTRY Diagnostics, XENTRY TIPS, XENTRY Flash and XENTRY Support & Feedback, as well as to the hardware diagnostic solutions XENTRY Kit and new tools such as XENTRY Control.

Which better AUTOBOSS V30, MaxiDAS DS708 and Launch X431 V+

Which better AUTOBOSS V30, MaxiDAS DS708 and Launch X431 V+
Product Name		LAUNCH X431
Item No.	SP31	SP160	SC39-B	SP184
Price	$499+ shipping	$1,099+ shipping	$1,099 free shipping + one TS401	$1,759 free shipping
Highlight	Original touch-screen tool	Original touch-screen tool	Original touch-screen tool	Original touch-screen tool
Wifi	NO	NO	YES	YES
Bluetooth	Yes	NO	NO	YES
Print	Yes	Built-in Mini Printer	Yes	Yes
Language	English, Spanish, French, Russian, German and Traditional Chinese	English, Spanish, French, Italian, German, Russian	English, Spanish, French, German, Portuguese,Russian	English, German, French, Italian, Spanish, Portuguese, Polish, Russian, Japanese, Traditional Chinese
Reset Language	The default language is . if you want to reset language, please supply serial number.	When the user receive the package, The default language is that you custmized,to reset as other language is allowed by supplying us serial number.	The default language is that you custmized,to reset as other language is allowed.	When the user receive the package, the default machine is the language that you customized, to reset as other language is allowed.
Update	One Year Free Update Online	one year free update online,after one year charge 279usd.	one year free update online,after one year charge 695usd/Year for USA and Canada Customers, and 500usd/Year for the other customers from other areas.	One year free update online,after one year charge 750usd
Operation System	Windows CE.	Windows CE	Windows CE	Android system（Huawei pad）
Memory	2GB SD Card	64M	with 4GB SD memory card	1G with 8GB Storage card
CPU	SAMSUNG ARM 2410A, 200MHz	SAMSUNG ARM9 2410A, 200MHz	ARM9+ARM7 Quod-core processor	HUAWEI HiSilicon Quod-core 1.2G HZ LAUNCH X431
Main Function	Diagnose	Diagnose	Diagnose	Diagnose
Special Function	Key programming, electronic parking brake, service light reset and much more	Electronic parking brake, Service light reset and much more	key programming, such as 99 Nissan Maxima2004 infiniti G35
Car list	Cover more  LAUNCH X431 than 57 makes, 40,000 vehicle system	More than 57 makes.	More than 50 makes(no Chinese carlist)	More than 60 makes(Global Version add India,Australia).